This VGA UTP Extender with Audio is an ideal device for local displaying and remote viewing. It combines split function and extension function. It distributes the input of the VGA signal and audio signal into the output receiver by Cat5 x1. It receives the signal from the sender and transmits to the display.
The receiver works with the Sender as a full functional module. Only by the most inexpensive CAT-5e/6 cable the full functional module extends the VGA display up to 300 meters max.
It offers great solutions for inexpensive VGA projection, as well as factory, noise, and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Features
This device has many features that enable it to perform in a superior manner. Among those features you will find:
- Extend VGA video and stereo audio signal max up to 300m over one UTP cat5e/6 cable
- Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
- Support resolution max up to 1920x1200.
- Dual output at local unit: 1 x VGA output for local site, plus 1 x UTP output for remote site.
- Work with monitors projectors, HDTV, and flat panels.
SPECIFICATIONS
|
Input connector |
VGA(Female 15pin), Stereo Audio |
|
Output connector |
VGA(Female 15pin), Stereo Audio,1xRJ45 |
|
Operating Frequency |
|
|
Vertical Frequency Range
|
60/75/85Hz |
|
Resolutions(PC): 640X480, 800X600, 1024X768, 1280X720, 1280X768, 1280X960, 1280X1024, 1600X900, 1600X1200, 1920X1080, 1920X1200 |
|
Size of Receiver (L-W-H) |
100×65×25.5MM |
|
Weight of Receiver (Net) |
385G |
|
Operating Humidity |
10% to 85 % RH (no condensation) |
|
Storage Humidity |
5% to 90 % RH (no condensation) |
|
Power Supply for VGA UTP Extender 1X1 Splitter |
5V@2A, max 5W |
|
Power Supply for Receiver |
5V@2A, max 5W |
|
Converter Unit |
FCC,CE,UL |
|
Power Supply |
UL,CE,FCC |
