 |
 |
 |
|
This VGA UTP Extender 1X2 Splitter with Audio is an ideal device for local displaying and remote viewing. It combines split function and extension function. It distributes the input of the VGA signal and audio signal into the two identical outputs simultaneously. Two Receivers by Cat5 x1 receive the distributed signal from the sender and transmit to displays individually. Each receiver works with the Sender as a full functional module. Only by the most inexpensive CAT-5e/6 cable the full functional module extend the VGA display max up to 300 meters
- Input connector: VGA(Female 15pin), Stereo Audio
- Output connector: VGA(Female 15pin), Stereo Audio,2xRJ45
- Vertical Frequency Range: 60/75/85Hz
- Resolutions(PC): 640X480, 800X600, 1024X768, 1280X720, 1280X768, 1280X960, 1280X1024, 1600X900, 1600X1200, 1920X1080,1920X1200
- Size of Receiver (L-W-H): 100×65×25.5MM
- Weight of Receiver (Net): 385G
- Operating Humidity: 10% to 85 % RH (no condensation)
- Storage Humidity: 5% to 90 % RH (no condensation)
- Power Supply for VGA UTP Extender 1X2 Splitter: 5V@2A, max 5W
- Power Supply for Receiver: 5V@2A, max 5W
- Converter Unit: FCC,CE,UL
- Power Supply: UL,CE,FCC
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Extend VGA video and stereo audio signal max up to 300m over one UTP cat5e/6 cable
- Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
- GAIN: Brightness adjustment.
- PEAK: Skew adjustment.
- Support resolution max up to 1920x1200.
- Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site.
- Work with monitors, projectors, HDTV, and flat panels.
|
|
|
|
|
|
|
