RCA component interconnects provide high definition video signal transfer between DVD players, game systems, and high-end TVs or monitors for optimum picture resolution and color. Precision 75 Ohm impedance for max. signal transfer EMI-RFI protected double high density aluminum shield.

• Precision 75Ω Impedance for Max. Signal Transfer – EMI-RFI Protected Double High-Density Aluminum Shield – 100% 0.12mm Aluminum-Polyester Foil Shield – 5 RG59 95% Copper-Braid Shielded Conductors – Flat-Ribbon Cable Configuration – 95% Spiral-Wound-Shield Audio Conductors – 99.99% Pure Oxygen-Free Copper Wire – Ultra-Flex Satin-Ivory Rubber 6.0mm OD PVC Jacket – Low-Attenuation Foamed Cellular Dielectric – 24K Gold-Plated Heavy-Duty RCA Connectors – Color-Coded – Fully Molded Construction

Analog component video
Reproducing a video signal on a display device (for example, a CRT) is a straightforward process complicated by the multitude of signal sources. DVD, VHS, computers and video game consoles all store, process and transmit video signals using different methods, and often each will provide more than one signal option. One way of maintaining signal clarity is by separating the components of a video signal so that they do not interfere with each other. When a signal is separated this way it is called 'component video'., RGB and YPbPr signals comprise two or more separate signals: hence, all are 'component video' signals. For most consumer-level applications, analog component video is used. Digital component video is slowly becoming popular in both computer and home-theatre applications. Component video is capable of carrying signals such as 480i, 480p, 576i, 576p, 720p, 1080i and 1080p, and new high definition TVs support the use of component video up to their native resolution.
RGB analog component video
The various RGB (red, green, blue) analog component video standards (e.g., RGBS, RGBHV, RG&SB) use no compression and impose no real limit on color depth or resolution, but require large bandwidth to carry the signal and contain much redundant data since each channel typically includes the same black and white image. Most modern computers offer this signal via the VGA port. Many televisions, especially in Europe, utilize RGB via the SCART connector. All arcade games, excepting early vector and black and white games, use RGB monitors.
Analog RGB is slowly falling out of favor as computers obtain better clarity using digital (DVI) video and home theater moves towards HDMI. Analog RGB has been largely ignored, despite its quality and suitability, as it cannot easily be made to support digital rights management. RGB was never popular in North America for consumer electronics, although it was used extensively in commercial, professional and high-end installations, as S-Video was considered sufficient for consumer use.